So I was looking into body cameras and recently got one I thought was worth talking about, it's the amazon recommended choice and I was surprised at how well it works.

https://www.amazon.com/gp/product/B08D8K...UTF8&psc=1

this pen camera by leeboom is one of dozens of cheap models made in china and despite that it's actually decent.

Pro's:
sturdy build quality (unusual for china).
comes with everything already
can record up to 2.5 hours of HD video
doubles as an actual pen
is Inconspicuous
Simple operation
Also records audio
Indicator light is on the side of the pen that faces the shirt if in a shirt pocket, opposite the camera and mic. (also doubles as reset switch)
has a sliding camera cover.

Cons:
Minimal help
takes getting used to
camera is a standard HD webcam/cellphone type and doesn't support very low light situations well.
Records in AVI format.
Doesn't appear to have an indicator when things are full so make sure to either carry more micro SD cards or just empty the drive when not in use.
Be aware, when it's full it deletes the oldest file on the drive so again, Empty the body camera of data when not in use.

Image 1: Pen camera fully assembled


Image 2: Inside showing USB data/charging port and micro SD card in slot


Image 3: camera is on the pen clip.


It surprised me with how well it works despite it's price, $35 USD may seem like a lot, and I got it using my amazon points, however when you consider the above pro's and con's $35 is actually pretty cheap for what amounts to a tiny inconspicuous camera you can wear in situations you may want one in without drawing attention to yourself.

so what do you guys think?, paranoid though it may be, I for one feel a lot better being out in public with the ability to record a situation and prevent false accusations, doubly so as a guy given then #Metoo movement unintentionally caused a bunch of false claims to be mixed in with actual legitimate ones.

Plus it feels a bit like a james bond device, wish I had my own agent Q lol.

alternative uses for this (since it's also a pen) could be things like recording lectures, taking audio/video notes, and of course making records of incidents if you're working with machines or something goes horribly wrong in an experiment.

Built a new computer. New everything except for graphics card. I switched from Intel i7 6700K to AMD Ryzen 7 5800X.



Here's the output of inxi -F

Due to an increase in spambots signing up for makestation, any new members have to verify by either sending or responding to a PM before their registration can be completed.

this is a temporary measure until a more effective anti-spambot measure can be found.

-SpookyZ

So some of you might have heard of logic gates, usually regarding transistors and the like.  Well they're actually pretty simple, I'm going to attach a nice diagram that shows the symbol and what they do but I'm also going to explain in detail about them.



1 = has power, 0 = does not have power, logic gates are by nature, binary on/off state switches that use their inputs to determine the output.

AND
And gates... basically if A and B = 1 (has power), then X=1, if either or both = 0 then X = 0
A B X
0 0 0
1 0 0
0 1 0
1 1 1

OR
if A or B is = 1, then X = 1, if both are = to 1 or 0 then x = 0.
a b x
0 0 0
0 1 1
1 0 1
1 1 1

NAND
Not - And gate, it's a bit more complicated, basically x= 1 if not all the inputs are 1, so if a b and C = 1, then x = 0, but if a and b = 1 and c = 0, then x =1.
a b x
0 0 1
0 1 1
1 0 1
1 1 0

NOR
Not - Or Gate, opposite of Or gate, x= 1 if a and b = 0, if either or both = 1 then output is 0
a b x
0 0 1
1 0 0
0 1 0
1 1 0

XOR
ex-or gate, x=1 only if both a and b = 0
This one would be good if you have a video switch and want to prevent cross signal contamination by basically preventing output from 2 if 1 is active and vice versa.
a b x
0 0 0
0 1 1
1 0 1
1 1 0

XNOR
Ex-Nor gate, x=1 when either both inputs are 1 or 1, x= 0 when one input = 0 and another =1
a b x
1 1 1
1 0 0
0 1 0
0 0 1

NOT
NOT gate, also known as an inverter gate, inputs are inverted so if a=1 then x =0, if a = 0, then x=1
a x
1 0
0 1

you could replace the Xor gate with a Xnor and a Not gate to invert the state and make x=1 only if the input to the Not gate is 0.  It's Generally easier to use an Xor gate though.

While the charges ("roaming") for mobile phone calls in the countries of the European Union have fallen significantly in recent years and have been completely abolished in some cases, the use of the German mobile phone connection in the USA continues to incur high roaming charges at three euros per minute - it does not matter whether the participant is called or calls himself. A few urgent phone calls with the boss or short vacation reports to those who stayed at home via mobile phone can quickly cost well over 100.00 euros.

 What does a SIM card cost in the USA? Which can you recommend?

If you go to "Set custom permissions" for guests in ACP forum management, the "Miscellaneous" tab looks like this:


The error is caused by an typo in admin/modules/forum/management.php line 791.

Saddened to see this forum languish and die from spam, poor management, and inactivity as a result of the previous two things I listed

A 2021 Tesla Model S Plaid sedan caught fire Tuesday night in Haverford, Pennsylvania, while the owner was at the wheel, according to Charles McGarvey, chief fire officer for the Lower Merion Township Fire Department.

Tesla began deliveries of the Model S Plaid, a new high-performance version of its flagship electric sedan, in June, after CEO Elon Musk had said on the Joe Rogan Experience podcast that they would begin in February.

Musk explained in April that development involved “more challenges than expected” and added, “it took quite a bit of development to ensure that the battery of the new S and X is safe.”



https://www.cnbc.com/2021/07/01/tesla-mo...chief.html

What are some of your favorite fashion trends?

for me Steampunk is one of my favorites as well as the ever classic Denim jacket look, especially covered in patches and pins though it'd be a bit out of place in steampunk I think lol.

so for me some of my favorite tools besides my wrenches and sockets for working on the jeep is the drill I picked up a while back.

I got a bit set for it that can even drill holes in metal and a hole making bit for it which proved useful when I was making a circuit box for the relay to control the additional fan on the jeep.

I highly recommend investing in reinforced bits that can drill into metal, if nothing else it means that whatever you use them on they'll work decently.

tools I'd like to have that seem useful however would be stuff like a 3D printer, a CNC machine, a laser cutter, etct, I've thought about building them but space is the issue atm.

so what are some tools you guys have used or want to have that seem useful and or really like?