Posts: 1,170
Joined: Mar 2020
Reputation:
44
Location: Austria
Posts: 1,170
Joined: Mar 2020
Reputation:
44
Location: Austria
March 1st, 2023 at 5:31 AM
3d printing thread
If several people here in the forum like Spooky and I use a 3D printer, a thread or category would be interesting.
Printer settings (fan speed, pad and needle temperature) Pad glue or primer which brand e.g
Print templates, with support structure and if any .. triangle .etc
[x] <= Drive in nail here for new display!
Posts: 2,682
Joined: Jun 2013
Reputation:
105
Location: Tycho City, Tycho Crater, Luna.
Items (1) ▼
Posts: 2,682
Joined: Jun 2013
Reputation:
105
Location: Tycho City, Tycho Crater, Luna.
Items (1) ▼
March 1st, 2023 at 8:34 PM
So I use a glass heated printing bed and haven't needed any kind of pad, glue, or primer. I have to be careful about my printing settings though because taller objects can sometimes lift off the printing bed.
I do however use hot glue to attach pieces together. As it turns out Hot glue is great for PLA and my hot glue gun gets hot enough I could actually extrude PLA to fuse parts together through it if I wanted to. (360* F)
"I reject your reality and subsitute my own." - Adam Savage, Mythbusters
![[Image: 5.jpg]](http://www.nodiatis.com/pub/5.jpg)
Posts: 1,170
Joined: Mar 2020
Reputation:
44
Location: Austria
Posts: 1,170
Joined: Mar 2020
Reputation:
44
Location: Austria
March 2nd, 2023 at 5:56 AM
Ok 360 Grad Fahrenheit = ca 180 Grad Celdius,
I print with needle temperature 207 degrees C and 42 C pad temp, Druckersoftware under Windows I use Cura Ultimaker!
[x] <= Drive in nail here for new display!
Posts: 2,682
Joined: Jun 2013
Reputation:
105
Location: Tycho City, Tycho Crater, Luna.
Items (1) ▼
Posts: 2,682
Joined: Jun 2013
Reputation:
105
Location: Tycho City, Tycho Crater, Luna.
Items (1) ▼
March 2nd, 2023 at 6:59 AM
(March 2nd, 2023 at 5:56 AM)tc4me Wrote: Ok 360 Grad Fahrenheit = ca 180 Grad Celdius,
I print with needle temperature 207 degrees C and 42 C pad temp, Druckersoftware under Windows I use Cura Ultimaker!
I use cura ultimaker too. On Linux ?. Serious props for having a Linux version.
"I reject your reality and subsitute my own." - Adam Savage, Mythbusters
Posts: 1,170
Joined: Mar 2020
Reputation:
44
Location: Austria
Posts: 1,170
Joined: Mar 2020
Reputation:
44
Location: Austria
March 2nd, 2023 at 7:08 PM
(March 2nd, 2023 at 6:59 AM)SpookyZalost Wrote: (March 2nd, 2023 at 5:56 AM)tc4me Wrote: Ok 360 Grad Fahrenheit = ca 180 Grad Celdius,
I print with needle temperature 207 degrees C and 42 C pad temp, Druckersoftware under Windows I use Cura Ultimaker!
I use cura ultimaker too. On Linux ?. Serious props for having a Linux version.
FreeCAD 0.20.2 and
I also use Blender 3.4.1, it's also available for Linux
[x] <= Drive in nail here for new display!
Posts: 2,682
Joined: Jun 2013
Reputation:
105
Location: Tycho City, Tycho Crater, Luna.
Items (1) ▼
Posts: 2,682
Joined: Jun 2013
Reputation:
105
Location: Tycho City, Tycho Crater, Luna.
Items (1) ▼
March 3rd, 2023 at 9:33 PM
@ tc4me I really need to start learning to design my own models. It's going to be a big game changer.
"I reject your reality and subsitute my own." - Adam Savage, Mythbusters
Posts: 1,170
Joined: Mar 2020
Reputation:
44
Location: Austria
Posts: 1,170
Joined: Mar 2020
Reputation:
44
Location: Austria
March 4th, 2023 at 6:43 PM
3D scanner would be awesome
[x] <= Drive in nail here for new display!
Posts: 2,682
Joined: Jun 2013
Reputation:
105
Location: Tycho City, Tycho Crater, Luna.
Items (1) ▼
Posts: 2,682
Joined: Jun 2013
Reputation:
105
Location: Tycho City, Tycho Crater, Luna.
Items (1) ▼
March 4th, 2023 at 11:17 PM
(March 4th, 2023 at 6:43 PM)tc4me Wrote: 3D scanner would be awesome
No kidding, I could mass duplicate stuff and scan parts in to make replacements after cleaning up the scan.
"I reject your reality and subsitute my own." - Adam Savage, Mythbusters
Posts: 1,170
Joined: Mar 2020
Reputation:
44
Location: Austria
Posts: 1,170
Joined: Mar 2020
Reputation:
44
Location: Austria
March 5th, 2023 at 6:26 AM
which scanner do you recommend?
[x] <= Drive in nail here for new display!
Posts: 2,682
Joined: Jun 2013
Reputation:
105
Location: Tycho City, Tycho Crater, Luna.
Items (1) ▼
Posts: 2,682
Joined: Jun 2013
Reputation:
105
Location: Tycho City, Tycho Crater, Luna.
Items (1) ▼
March 5th, 2023 at 6:28 AM
(March 5th, 2023 at 6:26 AM)tc4me Wrote: which scanner do you recommend?
Tbf I don't know a lot about them yet. But I may look into getting one next year?
"I reject your reality and subsitute my own." - Adam Savage, Mythbusters
Posts: 1,170
Joined: Mar 2020
Reputation:
44
Location: Austria
Posts: 1,170
Joined: Mar 2020
Reputation:
44
Location: Austria
March 5th, 2023 at 6:58 AM
ahh, ok ok , but There are some apps for smartphones but I haven't tested any yet
[x] <= Drive in nail here for new display!
Posts: 2,682
Joined: Jun 2013
Reputation:
105
Location: Tycho City, Tycho Crater, Luna.
Items (1) ▼
Posts: 2,682
Joined: Jun 2013
Reputation:
105
Location: Tycho City, Tycho Crater, Luna.
Items (1) ▼
March 5th, 2023 at 7:34 AM
(March 5th, 2023 at 6:58 AM)tc4me Wrote: ahh, ok ok , but There are some apps for smartphones but I haven't tested any yet
Let me know if any work well.
"I reject your reality and subsitute my own." - Adam Savage, Mythbusters
Posts: 1,170
Joined: Mar 2020
Reputation:
44
Location: Austria
Posts: 1,170
Joined: Mar 2020
Reputation:
44
Location: Austria
March 5th, 2023 at 4:28 PM
yes 
[x] <= Drive in nail here for new display!
|
![[Image: autism4all.png]](https://www.autism4all.at/datein/autism4all.png)
![[-]](https://makestation.net/images/core//collapse.png)
