[tc4me]

Installed on my Audi 2 new turbochargers including manifolds, power level 3, 20 hours of work, on Wednesday we go to the dynamometer and adapt the software, should be around 900 hp :-) I'm curious, I also took some pictures

I'm curious, what is power level 3?

Stage 3 is: 
Changed engine control including cancellation of the rev limiter when stationary, change in the flap control and increase in the V-max limit as well as an increase in the sound experience, adapted transmission control with changed switching logic, increased clutch pressure, shortened switching times and adjustment of the torques, modified, large IHI turbochargers in exchange, Modified APR MAP sensors, Modified APR DOWNPIPES exhaust downpipes with metal catalyst and thermal insulation in exchange: replaces the standard downpipe, Modified large water cooler for intercooling Modified APR intake with REVO sports air filter, enlarged hoses and enlarged intake manifold, Stage 3 is now the last stage with the large turbos , more is not possible, now I would have to remove the cylinder heads and install other valve springs, because the supercharger pressure would open the intake valves if there was even more pressure. Were on the performance update today and now have 915.1 hp with 1150 NM torque :-)