+- Makestation (https://makestation.net)
+-- Forum: Area 52 (https://makestation.net/forumdisplay.php?fid=58)
+--- Forum: General Discussion (https://makestation.net/forumdisplay.php?fid=36)
+--- Thread: [Debate] 3d printing/er Thread or Category (/showthread.php?tid=3778)
3d printing/er Thread or Category - tc4me - March 1st, 2023
3d printing thread
If several people here in the forum like Spooky and I use a 3D printer, a thread or category would be interesting.
Printer settings (fan speed, pad and needle temperature) Pad glue or primer which brand e.g
Print templates, with support structure and if any .. triangle .etc
RE: 3d printing/er Thread or Category - SpookyZalost - March 1st, 2023
So I use a glass heated printing bed and haven't needed any kind of pad, glue, or primer. I have to be careful about my printing settings though because taller objects can sometimes lift off the printing bed.
I do however use hot glue to attach pieces together. As it turns out Hot glue is great for PLA and my hot glue gun gets hot enough I could actually extrude PLA to fuse parts together through it if I wanted to. (360* F)
RE: 3d printing/er Thread or Category - tc4me - March 2nd, 2023
Ok 360 Grad Fahrenheit = ca 180 Grad Celdius,
I print with needle temperature 207 degrees C and 42 C pad temp, Druckersoftware under Windows I use Cura Ultimaker!
RE: 3d printing/er Thread or Category - SpookyZalost - March 2nd, 2023
(March 2nd, 2023 at 5:56 AM)tc4me Wrote: Ok 360 Grad Fahrenheit = ca 180 Grad Celdius,
I print with needle temperature 207 degrees C and 42 C pad temp, Druckersoftware under Windows I use Cura Ultimaker!
I use cura ultimaker too. On Linux ?. Serious props for having a Linux version.
RE: 3d printing/er Thread or Category - tc4me - March 2nd, 2023
(March 2nd, 2023 at 6:59 AM)SpookyZalost Wrote:(March 2nd, 2023 at 5:56 AM)tc4me Wrote: Ok 360 Grad Fahrenheit = ca 180 Grad Celdius,
I print with needle temperature 207 degrees C and 42 C pad temp, Druckersoftware under Windows I use Cura Ultimaker!
I use cura ultimaker too. On Linux ?. Serious props for having a Linux version.
FreeCAD 0.20.2 and
I also use Blender 3.4.1, it's also available for Linux
RE: 3d printing/er Thread or Category - SpookyZalost - March 3rd, 2023
@tc4me I really need to start learning to design my own models. It's going to be a big game changer.
RE: 3d printing/er Thread or Category - tc4me - March 4th, 2023
3D scanner would be awesome
RE: 3d printing/er Thread or Category - SpookyZalost - March 4th, 2023
(March 4th, 2023 at 6:43 PM)tc4me Wrote: 3D scanner would be awesome
No kidding, I could mass duplicate stuff and scan parts in to make replacements after cleaning up the scan.
RE: 3d printing/er Thread or Category - tc4me - March 5th, 2023
which scanner do you recommend?
RE: 3d printing/er Thread or Category - SpookyZalost - March 5th, 2023
(March 5th, 2023 at 6:26 AM)tc4me Wrote: which scanner do you recommend?
Tbf I don't know a lot about them yet. But I may look into getting one next year?
RE: 3d printing/er Thread or Category - tc4me - March 5th, 2023
ahh, ok ok , but There are some apps for smartphones but I haven't tested any yet
RE: 3d printing/er Thread or Category - SpookyZalost - March 5th, 2023
(March 5th, 2023 at 6:58 AM)tc4me Wrote: ahh, ok ok , but There are some apps for smartphones but I haven't tested any yet
Let me know if any work well.
RE: 3d printing/er Thread or Category - tc4me - March 5th, 2023
yes
